Resfab CR-40F Manual de instrucciones descargar pdf (Pagina 12)

Resfab Equipment Inc. CR-40F & CR-60F

MULTI PROGRAM

CONTROLLER

(continuation)

Choosing menus and cooking (steps)

1- Press the MENU SELECT key. Use the UP or DOWN key to

select a cooking menu and press the START / STOP key. Letters

Pre-HEAT will appear on the screen for a few seconds followed by

the oil temperature. Oil temperature will increase of 25ºF per

minute approximately.

2- When the oil temperature is reach, the buzzer will sound for 5

seconds and letters rEAdY will appear on the screen. The key

START / STOP will blink more rapidly.

3- Press the START / STOP key to start the cook cycle. The basket

will lower and the cooking time will show on the screen.

BUZZER OPTION WHILE COOKING CYCLE:

4- If the menu has been programmed with the buzzer option, when that

step is reached, the buzzer will sound for 5 seconds and the step will

be shown on the screen for 10 seconds. Cook cycle and timer will

not be interrupted.

5- At the end of the cook cycle, the buzzer will sound for 20 seconds

and letters End will appear on the screen. Following that 20

seconds, The START / STOP key will blink slowly and letters

idLE will be displayed to indicate the fryer is ready for another

cooking cycle.

IMPORTANT

- At any time during the cook cycle, the basket can be

rise by pressing the UP key. The word Pause will be

displayed on the screen and the timer will stop. To

lower the basket, press the DOWN key. The timer

will resume time when the basket is fully down the oil

pan.

- The cook cycle can be stopped at any time by pressing

the START / STOP key for 5 seconds.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Sin comentarios

Resfab CR-40F Manual de instrucciones Pagina 12